Beschreibung
QC Pearl Luster liquid Over-Glaze Application - Crafist®
QC Pearl Luster is ready to use. It is recommended to clean the surface to be applied with cellulosic thinner or alkolhol before the application. The firing range is between 650 °C -800 °C.
How to Use QC Pearl Luster Liquid Over-Glaze;
- Be sure to use gloves before starting the application.
- It is applied by thinning 4 units of QC Pearl Luster liquid with 2 unit of cellulosic thinner.
- QC Pearl Luster Liquid Over-Glaze decor application is homogeneously applied to the surface in the form of a thin layer.
- This is because; It is ensured that the gas released in the kiln is removed from the environment.
- When the kiln reaches its maximum temperature, it should be kept for 15 minutes.
- We recommend using natural bristle (or soft synthetic) brushes.
- After cleaning your brush after application, pack it in a way that it does not get dusty.
- We recommend that you use a mask.
- Ventilate the application area
|
Firing Range |
650 °C -800 °C |